Determine IP Address

Choose Your Firmware

To determine the IP address currently used by your EnergySwitch, first choose your firmware version from the options below. (Determining your firmware)

Firmware v1.2 or higher

  1. Press the MENU button until the Menu appears, select Network Settings using the DOWN button and press OK.
    2. Racktivity Menu v1.2 or higher
  2. Use the DOWN button to select IP Address. The current IP address is shown at the bottom of the display.
    3. Racktivity Network Settings v1.2 or higher

Firmware v1.1 or lower

  1. Press the MENU button until the Main menu appears, select Network using the UP and DOWN buttons and press OK.
    2. Racktivity Main Screen v3.00
  2. Use the UP and DOWN buttons to select Current IP-Address. The current IP-address is shown in yellow at the bottom of the display.
    3. Racktivity Network Settings Screen v3.00